Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
WOOD-BURNING TOOLS
Sort By:
1 2 3 ... 6
Dremel 932 Grinding Stone Dremel 952 Grinding Stone Dremel 402 Mandrel
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels.
Dremel 541 Grinding Wheel Dremel 401 Mandrel Dremel 8193 Grinding Stone
Dremel Grinding Wheel, 7/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, 35000 rpm Maximum, Gray, For Shaping, Smoothing, Sharpening, Deburring, Rust Removal and General Purpose Grinding on Most Materials Dremel Mandrel, Suitable For Use With: 414, 422 and 429 Dremel Accessories, 1/2 in Head Size A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Dremel Bosch Sanding Band Dremel 560 Cutting Bit Dremel 432 Drum Sander Band
Dremel Sanding Band, Series: Bosch, Suitable For Use With: Dremel ZW77000 2-Speed Cordless Grinder, Fine 120 Grit, 1/4 in Head Diameter, 1/8 in Shank, Aluminum Oxide, For rough shaping and smoothing Wood and Fiberglass, removing Rust from Metal surfaces and shaping Rubber Surfaces Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 408 Drum Sander Band Dremel EZ Lock Finishing Abrasive Buff Set Dremel 480 Collet
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Bosch 431  Oscillating Tool Accessories Dremel 422 Felt Polishing Tip
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 429 Felt Polishing Wheel Dremel 85422 Grinding Stone Dremel 482 Collet
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Dremel Grinding Stone, 25/32 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Silver, For Sharpening, Deburring and General Purpose Grinding on Harder Materials Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/6 in Diameter X 1 in Length
Dremel 483 Collet Dremel 461 Polishing Point Dremel 463 Tapered Polishing Point
Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/32 in Diameter X 1 in Length Dremel Polishing Point, 1/4 in Diameter, Cylindrical Shape, 3/32 in Arbor/Shank, Rubber Abrasive, Gray, For Ferrous Materials Dremel Polishing Point, Tapered, 1/4 in Diameter, 3/32 in Arbor/Shank, Rubber Abrasive, Gray, For Ferrous Materials
Dremel 8153 Grinding Stone Dremel 8175 Grinding Stone Dremel 83142 Grinding Stone
Dremel Grinding Stone, 3/16 in Diameter, Cylindrical Shape, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, 3/8 in Thickness, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 3/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, 3/8 in Thickness, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 9/32 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Harder Materials
Dremel 997 Grinding Stone Dremel 941 Grinding Stone Dremel 108 Short Cylinder Engraving Cutter
Dremel Grinding Stone, 1/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 5/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Engraving Cutter, Short Cylinder, 1/32 in Diameter, 9-9/16 in Length, Inverted Cone Shape, 1/8 in Arbor/Shank, Carbon Steel, Gray, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing
   
 
1 2 3 ... 6